 Low 3DMark06 Score? |
  |
 Nov 3 2009, 03:18 PM
Post
#1
|
|
 Group: Members Posts: 56 Joined: 8-October 09 Member No.: 243,318 Club SLI Member: No  |
   System Windows 7 64bit Q9550 OC'd to 3.6ghz 40 deg C idle BFG 1000 watt EX PSU XFX 790i SLI BFG 260 Maxcore GTX's in Two-Way SLI Gskill DDR3 1600mhz 8GB 8-8-8-24 2T 1.65v WD caviar Black 32mb cache 640GB x2 Raid 0 I would have thought with this system i would be well over the 20,000 marks... maybe i have a setting wrong? -------------------- Windows 7 64bit
Q9550 4.0ghz Quad Core XFX Nforce 790i ULTRA BFG 1000 watt PSU EX Series Gskill DDR3 1600mhz 8-8-8-24 2T 1.65v WD Caviar Black 640 Raid 0 BFG 260 GTX MaxCore 55 OC x2 SLI |
 |
 
|
|
Nov 3 2009, 03:36 PM
Post
#2
|
|
|
Group: Members Posts: 56 Joined: 8-October 09 Member No.: 243,318 Club SLI Member: No |
1920x1200 test
-------------------- Windows 7 64bit
Q9550 4.0ghz Quad Core XFX Nforce 790i ULTRA BFG 1000 watt PSU EX Series Gskill DDR3 1600mhz 8-8-8-24 2T 1.65v WD Caviar Black 640 Raid 0 BFG 260 GTX MaxCore 55 OC x2 SLI |
|
|
|
|
Nov 3 2009, 03:40 PM
Post
#3
|
|
 Group: Members Posts: 3,276 Joined: 24-September 09 From: North Carolinia Member No.: 194,292 Club SLI Member: Yes Org.: A & M computers |
3D mark 06 is a very CPU intensive benchmark. You would get a better overall feel for your system if you run Vantage. And your score looks about right for 3D 06.
-------------------- |
|
|
|
|
Nov 3 2009, 03:42 PM
Post
#4
|
|
|
Group: Members Posts: 56 Joined: 8-October 09 Member No.: 243,318 Club SLI Member: No |
QUOTE (ExtremeGrandpa @ Nov 3 2009, 10:40 AM)  3D mark 06 is a very CPU intensive benchmark. You would get a better overall feel for your system if you run Vantage. And your score looks about right for 3D 06. downloading it now. -------------------- Windows 7 64bit
Q9550 4.0ghz Quad Core XFX Nforce 790i ULTRA BFG 1000 watt PSU EX Series Gskill DDR3 1600mhz 8-8-8-24 2T 1.65v WD Caviar Black 640 Raid 0 BFG 260 GTX MaxCore 55 OC x2 SLI |
|
|
|
|
Nov 3 2009, 10:01 PM
Post
#5
|
|
|
Group: Members Posts: 56 Joined: 8-October 09 Member No.: 243,318 Club SLI Member: No |
 
-------------------- Windows 7 64bit
Q9550 4.0ghz Quad Core XFX Nforce 790i ULTRA BFG 1000 watt PSU EX Series Gskill DDR3 1600mhz 8-8-8-24 2T 1.65v WD Caviar Black 640 Raid 0 BFG 260 GTX MaxCore 55 OC x2 SLI |
|
|
|
|
Nov 4 2009, 10:15 PM
Post
#6
|
|
|
Group: Members Posts: 1 Joined: 27-October 09 Member No.: 243,596 Club SLI Member: Yes |
 
|
|
|
|
|
Nov 4 2009, 10:42 PM
Post
#7
|
|
|
Group: Members Posts: 335 Joined: 14-May 09 From: SoCal-USA Member No.: 154,773 Club SLI Member: Yes Org.: Socom Computers |
kaku-
Your score is about rite... You can gain 1k-2k more 3dmarks in 06' by raising your HT link to 2200-2400mhz and NB link to 2600-2800mhz and at least another 1k by raising you cpu clock to 3.6Ghz. (this will allow your sli set up to breath a bit more and work @ full potential) Try this: multi-16x fsb=225 CPU->NB= auto NB link= 12x (NB=2700mhz) This is of course dependent on aftermarket cooling of your cpu. You may have to raise voltage on your ram and NB. Complete system specs would help a bit  along with system temps @ idle and load.You have a bit of head room on that 940 @ 1.33v providing it's running cool enough. This should also increase you ram spd a bit.. (don't have a calc. on me but should be around 930-960Mhz) again... this depends on your main/motherboard's max limit and type of ram you have, which is why system specs are a good thing
-------------------- |
|
|
|
 |
| Copyright 2008 NVIDIA Corporation. Terms of Use | Legal Info | Privacy Policy | Time is now: 24th November 2009 - 12:49 AM |
